Da-Lite Designer Contour Electrol
Electric Screen

Stylish Case
Featuring a stylish curved aluminum extruded case, standard with a white powder coated finish (also available in black or graphite case finishes), with dimensions of only 4-5/8" high x 4-3/32" deep.  Standard with a Decora® style three position wall switch.  An optional Low Voltage Control unit can be built directly into the case for easy installation.

Option of Seven Veneer Finishes
A white case is standard.  A black case is available at no extra charge just choose substitute black case when ordering.  An optional choice of seven veneer finishes available for the front cover of the screen case for a warm and elegant look.  Veneer finish add $139.00 to screen cost.  Please call our office at 800-960-4287 to order.
Veneers from left to right (top row) Honey Maple, Medium Oak, Heritage Walnut, Mahogany, (bottom row) Light Oak, Natural Walnut, Cherry.  Graphite case also available through the shopping cart - add $139.00 to screen cost.

Decora Style Wall Switch
Da-Lite Screen Company is pleased to announce their complete line of electrically operated projection screens and the three button low voltage control unit now ship standard with a Decora® style wall switch.  The stylish yet understated design of the three position Decora® switch is appropriate for both commercial and residential installations.  The three position single gang Decora® switch provides up, stop and down operation and is finished in white.  The new Decora® style design also allows the switch to be incorporated into a multiple gang configuration.

Installation
There are three ways to install the Designer Contour Electrol: Wall Mount, Ceiling Mount, or Ceiling Hook.  Complete installation instructions can be found at our Designer Contour Electrol installation page.




Motor In Roller Operation
Electrically operated 120 volt (60 Hz) 2.0 amp. Motor is mounted inside the roller with a patented noise silencer, oiled for life, with automatic thermal overload cut-out, integral gears, and capacitor and an electric brake to prevent coasting. The Designer Contour Electrol has a pre-set but adjustable limit switches to automatically stop picture surface in the "up" and "down" positions.  The roller is made of rigid metal, 2" in diameter. 

High Contrast Matte White Surface
High Contrast Matte White is the newest addition to Da-Lite’s line of gray screen surfaces. With a gain of 1.1 and a 50-degree half angle, the High Contrast Matte White is the perfect choice for installations utilizing DLP or LCD projectors with moderate output. With a gray colored base material and a specially designed reflective coating, the High Contrast Matte White fabric is designed to enhance the black level of projected images without sacrificing the white level output. High Contrast Matte White is designed for use in applications where a tensioned screen is not needed.  Matte White, High Contrast Matte White, Glass Beaded and Video Spectra 1.5 fabrics will be seamless in all sizes. High Power fabric will be seamless in sizes up to 6' in height.

Custom Sizes and Extras:
All screens are standard with borders, extra drop (fabric at top or bottom of the viewing surface) is available.  220V is available on all Electrol screens.  White case is standard but a black case is available at no extra charge, graphite and veneer case color available for $139.00 charge.  Low voltage control available for $199.00 charge.   Standard sizes are available through our shipping cart, please call our office for a quote on custom sizes, extra drop, case color or 220V power requirements. 

• No borders (black masking borders standard).
• Single Motor Low Voltage Control System - 3 Button. Available separately or built-in with screen. Built-in LVC will add 5" to length of case.
• Radio Frequency Wireless Remote Control for LVC System
• Infrared Wireless Remote Control for LVC System
• Key Locking Switch Cover Plate for 120 V Switch or 3-Button LVC Switch
• Key Operated Switch for 120 V only (Note: Cannot be used with low voltage system.)
• 220 V (50 Hz) Motor.
• SCB-100 - RS-232 Serial Control Board
• NET-100 Ethernet-Serial Adapter (must be used with SCB-100)
• Veneer finish for case cover
• Graphite case color

Measure Twice, Order Once
In order to ensure you select the right screen, please be sure to measure the room in which the screen will be placed.  Overall length of case dimensions can be found at the bottom of this page.  You can call toll free at 800-960-4287 if you have any questions on the sizes of screens. Visit our Screen Surfaces page for descriptions of all Da-Lite Screen surfaces.

Great Customer Service
At Ozarks Audio Visual we pride ourselves with great customer service and product knowledge.  We are an authorized Da-Lite dealer with years of experience working with, setting up and selling Da-Lite products.  When you place your order we can provide you with an invoice or necessary paperwork for your records.  When your order ships we'll send you a tracking number so you'll know when to expect your package. 

Drop Shipping
The Da-Lite screens sold are brand new units drop shipped directly from Da-Lite located in Warsaw Indiana, this saves time and money.  There may be a 5 day production time on electric screens.  Please use Time-In-Transit Map from Warsaw, Indiana as a reference as to how long it will take to receive your package once it has shipped.  If you have any questions please feel free to call our office at 800-960-4287 or e-mail us at sales@ozarksav.com.