Concealed-in-the-ceiling electric screen
The Boardroom Electrol is an electrically operated 120 volt (60Hz) screen. It has a specially designed motor mounted inside the roller with a patented noise silencer to be three wire quick reversal type, oiled for life. Also included is an automatic thermal overload cutout integral gears, capacitor and an electric brake to prevent coasting. Standard on the Boardroom Electrol are preset but adjustable limit switches to automatically stop the picture surface in the "up" and "down" positions.

Patented rubber mounting system for in-the-roller motor
The roller is made of metal, 3" in diameter, mounted on tow vibration and noise absorbing supports. The screen fabric is flame retardant and mildew resistant fiberglass with Glass Beaded, Matte White, Video Spectra, 1.5 or High Power picture surface (see screen surfaces for more information) with black masking borders standard.

Mechanical door closure conceals screen
The case of the Boardroom Electrol is made of wood with a metal lined wiring compartment. A section of the bottom of the case shall be a door equipped with a hinges so that it opens and closes automatically with the lowering and rising of the picture surface. When the picture surface is being lowered, the door will drop open by gravity. When the picture surface is being raised, the two ends of the slat in the bottom pocket of the screen fabric will engage two hooks on the door to lift it to the closed position where a limit switch will cut off the electrical current to the screen. The balance of the bottom of the case is a second hinged door with manual opening to provide access. Hinges are mounted to allow matching of the doors to the ceiling.

Call Francis Audio-Visual about installing this screen in your room or incorporating it with other equipment in a permanent installation.

Available Sizes and Screen Surfaces: